Code NV42-13-B20260929-0190

KM 10S

Name: KM 10S
SKU: NV42-13-B20260929-0190

Full Domination: Motor Domination The KM-10 door control card provides full control of the motor with 4 zone motor control and dual channel high resolution encoder input as hardware Door Movements: Serial and Smooth The advanced software softens the S in the navigation ramps and permits serial but smooth movements of the door movements with no limit switch-free algorithm Automatic Door Status Detection: No Limit Switches Required The door operator does not need a limit switch for operation. Door width, door open-close positions are detected automatically Power Interruption: Battery and DC Supply It can work with 2 12V battery supply or 24VDC external power supply Battery Check: Card Support The acupuncture is made by the card. After emergency door opening with battery support, the card will go to sleep, preventing the discharge of the pacemakers completely Closed Doors Up to Floor Level: Battery Charging System If the elevator is not in the door opening area with the floor signal, it is ensured that the doors are kept closed to the level of the floor in the cordless crawler systems Possible Door Jam: When the door is jammed, the buzzer is turned back on. The jamming is passed slowly through the perceived zone to prevent damage to the passengers and the door Access to the Menu: Authorization In terms of security, necessary needs and ease of setup, access to the menu has been authorized. Different levels of authority have been assigned to access the menu: producer level, basic level and restricted level Application Flexibility: Wide Parameter Capability For manufacturers, parameters such as motor reduction ratio, engine revolutions, drive pulley circumference, spoon opening zone, etc. can be entered for application flexibility User Settings: For user settings, defined speed settings in centimeters per second and defined ramp paths in centimeters can be specified Pressure Settings: Variability According to Need Door open and closed holding pressure, door jam detection can be adjusted according to the need of the press Door Operation Attachment: Counter Support Operation of the door can be monitored by the on / off counter Other Specifications Door fully open / fully closed Door jam or photocell active output Relay contact output. For 3A, 250VAC or 30VDC Door open / close signal Slow signal / fast signal Photocell signal Ground signal Active with 24VDC Suitable for use on fire lift doors (High speed signal input can be detected)